Your house is locked! The lock isn’t turning and you don’t know what to do. There are many reasons your key might not turn. A basic lock repair is sufficient in most cases. Depending on how severe the problem is, it may be necessary to replace the entire lock.
Usually, the lock won’t open because the key isn’t working. But this does not necessarily mean that the lock will work every time. The first step in lock repairs is to determine the problem. It’s just as important to know the type of lock it is and the fix it will need.
Every lock is different. It is important to determine the problem with your lock. Only then would you know what the lock needs to be fixed. You should never force the lock to turn. Broken-key extraction is a complicated step and you might need to call in a locksmith.
Learn about lock to determine the best solution. It is important that you are familiar with all lock types. Additionally, you need to be able to identify what could go right and what is wrong. The only way to solve a problem is to know the answers.
All this information is normally provided to the homeowner when lock Installation takes place. Here are the reasons the key might not turn the lock.
- Wrong key
- Jammed key
- Freezing
- Worn lock
- Worn key
Concerns for different lock types
All locks can’t be put under the same umbrella. There are several reasons why a key might not turn in a lock. Two locks would not have the same problem if one lock doesn’t turn in its cylinder. These are just a few of the many considerations you need to keep in mind.
You need to know the differences between locks before you can do this. This will help to identify the best lock solution. This will help you to repair the lock.
Key won't turn on car lock
Car locks differ from all other locks in many ways. The concerns for car locks are also different than other locks. The ignition chambers in cars can be very different and that is the main problem. First, you’ll need to replace the key stuck in ignition. You would then need to replace your car door lock cylinders. This is because most people prefer to have one key for their vehicle.
Consider the fact that keys to old cars are extremely rare. Their door locks can also be difficult to locate. The lock switch is one example. The biggest problem with lock installations is that it will be very costly. The cost of replacing and repairing a car lock will be twice as expensive as the cost of installing a new lock.
Key won't turn the house lock
There are many different locks for house doors. When the term locks are used to describe the locks on most houses, it is the locks that can be found in the house. When keys stop turning, there is a lot more variance in the locks. Many people don’t even care if a lock in their house stops working. Because there are so many ways inside, they could take another exit.
This is a major problem. It is urgent locksmith repair. This is a classic example for a mistake that should be avoided.
No key to unlock the padlock
The greatest problem with padlocks lies in the fact that they were not made to be disassembled or serviceable. When they stop working, there’s no way to take out the core. Modern padlocks are not equipped with removable cores.
It’s good if you can disassemble the padlock. You can then repair it the same way as you would a normal house lock. You have limited options if the core is not removed. Even the best padlocks can be dismantled. They provide security and convenience.
Key won't turn if you are using the wrong key
The Problem
There are many locks that use a key with the exact same profile. The problem of accidentally inserting the wrong lock key is common. Sometimes you might be able, with a little bit of force, to unlock the lock using the wrong key. However, other times you may be searching for broken code extraction.
Organic problems like these can also arise. This usually happens when a copy of a copy is copied from another copy. This means that the new key is likely to be quite different from the original. Therefore, the lock won’t turn.
The solution
You can purchase a new, simpler and cheaper key. You may have limited options if your original key is lost. You also would not have all the options available. But, there is always an lock change. It’s an expensive option, so it is worth considering getting new keys.
Lock jammed
The Problem
If you try to turn your key in the lock, you will hear a grinding sound. This indicates that the lock is dirty, or rusty. Before you assume that the lock may be broken, you will need lock replace. Spray some lubricant over the keyhole. You can then insert and take out the key multiple times.
To open the lock, turn the key in each direction. Repeat this process several times. The cost of installing a new lock and a lock is very high.
The solution
Most people believe that the problem is solved when it turns the key again. Even if you have used an oil-based grease, this is not true. Because dust and dirt attract to oil-based lubricants. This would make the problem worse.
Each lock can be transformed into a brand new lock by doing some basic cleaning. It is easy to remove dirt and dust from locks by taking them apart. Additionally, you can use rust elimination. Apply a polish to the finish. All this would transform the lock into a brand new one. The lock could also function as a brand new lock.
Key won't turn because of frozen hardware
The Problem
This is a problem that only occurs in cold temperatures. This is because the moisture freezes in the lock. The lock might not even be showing any signs of freezing. The lock would allow you to insert your key without any difficulty. But, if the key was to be rotated, it would not. It’s because the ice would freeze the lock’s mechanism in place.
The solution
The deicing agents can be used to melt the ice in the lock. It works the same way you would use a lubricant for dust and dirt removal. The deicing agents can be used to melt the lock’s ice and insert the key into it. You can also use the key to make some movement that would help you remove the ice.
Locks are very careful to keep heat away from the internal mechanism. This fact was not considered when designing the locks. The heat source won’t reach the area that is frozen. This doesn’t necessarily mean you should give up on trying. If you find it feasible, give it another chance.
The lock has been damaged or worn out, and the key won't work
The Problem
This problem is only possible after every other factor has been removed. This problem can be identified only after all other possible solutions have been exhausted. If the lock won’t turn after trying every possible solution, it could be a sign that something is wrong. It could be that the lock has a problem and needs to be repaired or replaced.
The solution
In this case, you will need to have a new lock installed. The task might be done temporarily with partial repairing, or replacement. However, it is necessary to identify the cause of the lock problem. Although you may have replaced all the problematic parts of the lock it might not turn. You will need to identify the technical reason why the lock isn’t turning.
